- 100% Ring Spun Combed Cotton
- Reactive Dyed
- Knitted Raised Collar & Cuffs
- Half Moon Yoke
- Taped Neck
- Taped Side Vents with Extended Back
- 3 Self Coloured Button Placket
|Size Chart - Body Measurement||XS||S||M||L||XL||2XL||3XL||4XL|
|Chest To Fit (Inch)||36-38||38-40||40-42||42-44||44-46||46-48||50-52||52-54|
|Chest To Fit (Cm)||87-92||92-97||97-102||107-112||112-117||117-122||122-132||132-137|
|Austria, Switzerland, German, Netherlands, Sweden||44||46||48||50||52||54||56||58|
|Belgium, Spain, France, Portugal||36-38||38-40||40-42||42-44||44-46||46-48||48-50||50-52|
|Chest 1/2 Measurement (1' Below Armhole) (Inch)||19||20||21||23||24||25||27||29|
|Length (Neck Point On Shoulder To Hem) Front (Inch)||25||27||28||29||30||30||31||32|
|Length (Neck Point On Shoulder To Hem) Back (Inch)||26||28||29||30||31||31||32||33|
|Chest 1/2 Measurement (2.5cm Below Armhole) (Cm)||48||51||53||58.5||61||63.5||68.5||73.5|
|Length (Neck Point On Shoulder To Hem) Front (Cm)||633.5||68.5||71||73.5||76||76||78.5||81|
|Length (Neck Point On Shoulder To Hem) Back (Cm)||66.04||71||74||76||79||79||81||84|
*Garment Measurement are subject to tolerances. They are not be taken as absolute measurement values. When a garment is measured, the values may vary and can be above, below or the same as the values stated.
Before washing, always look at the care label and carefully follow the instructions. Most good quality detergents, washing machines and fabrics are manufactured to ensure that when the stated instructions are adhered to and the garment is washed according to the said temperature and dried as per the procedures mentioned; they will wash well and look good after each wash.
The following points should be used as guidelines for all garments:
Owing to the numerous processes and techniques used for printing on garments, we strongly recommend that a single garment is printed on, then washed and tested to ensure it meets your requirements before bulk printing. Care should be taken to ensure the right kind of pigments/printing dyes are used while printing and the optimum temperature/heat levels are not exceeded. Violation of standards and procedures will result in the garment loosing it’s feel/lustre as well as weakening of the fabric and overall garment performance.